What changes when you get Coolsonic and Xerf on the same day?
Director Kim Serim ·
Coolsonic uses ultrasound to treat, point by point, depths close to the SMAS, while Xerf uses radiofrequency to heat the skin layers centred on the dermis evenly over a wide area. For a face with both SMAS sagging and loss of skin elasticity, treating the layers separately with both devices on the same day can help. At Serene Clinic, Coolsonic comes first and Xerf second on the same day, and when Gouri is added it goes in last. Shot distribution is decided after checking fat thickness and fascia depth with ultrasound before treatment.
At a glance
- Coolsonic
- Focused ultrasound (HIFU) · point coagulation at 1.5/3.0/4.5 mm · SMAS sagging and jawline
- Xerf
- Monopolar RF 6.78 MHz + 2 MHz · even heating over a wide area · skin elasticity, fine lines, texture
- Who it suits
- SMAS sagging together with loss of skin elasticity, or uneven sagging between sides
- Order & distribution
- Coolsonic → Xerf → (Gouri last) · shots allocated by zone after pre-treatment ultrasound
- Recovery
- Redness and mild swelling for 1–2 days; most people return to daily life right away
- When changes appear
- Gradually from 2–4 weeks, settling around 3 months (varies by person)
- Price
- Facial Asymmetry Correction Lifting package 2,999,000 KRW (as of the November 2026 menu)
Which layer of the face does each device work on?
Coolsonic mainly handles the deep area close to the SMAS, and Xerf mainly handles the skin layer centered on the dermis. Both devices use heat to trigger a tissue response, but they create heat differently and the heat spreads in a different shape.
Coolsonic focuses ultrasound into a single point and makes a row of tiny coagulation points at preset depths such as 1.5 mm, 3.0 mm, and 4.5 mm. Early research on focused ultrasound confirmed that coagulation forms only at the set depth while the skin surface outside the focus is largely spared[1]. That is why Coolsonic is strong for SMAS sagging and jawline definition.
Xerf is a monopolar RF device that uses 6.78 MHz and 2 MHz together to heat a wide area evenly rather than a single point. As dermal collagen responds to heat, changes are expected in skin elasticity, fine lines, and texture. In short, Coolsonic covers depth with points, and Xerf covers breadth with surfaces.
What is different about using both devices on the same day?
If the SMAS has descended and the skin itself has also loosened, using Coolsonic and Xerf together lets us treat layers that one device alone cannot fully reach. With Coolsonic alone, the jawline may improve while texture and fine lines remain a concern. With Xerf alone, deeper sagging may remain.
A systematic review of studies on focused ultrasound lifting reported improved skin elasticity, and side effects were mostly temporary[2]. For same-day ultrasound plus RF, there is a randomized split-face study of 26 people in which the combination was used on one side of the face and compared with the other side. At 3 months, the combined side had better elasticity and wrinkle scores, and side effects were mild[3].
However, the RF in that split-face study was microneedle RF, which delivers energy through needles inserted into the skin. This differs from Xerf's monopolar RF, which delivers heat from the skin surface without needles. The study was small and follow-up was short, so rather than applying it directly to Coolsonic plus Xerf, we see it as support for the general direction of a combined, layer-by-layer approach.
Getting both does not double the effect. Because the two devices handle different layers, the key is to divide them so they do not overlap. Concentrating too much energy on the same area may only increase swelling and discomfort.
How are the order and shot distribution decided on the same day?
The order and shot distribution are decided after checking fat thickness and SMAS depth with an ultrasound scan before treatment. The SMAS usually lies at a depth of 4.5 mm, but for people whose skin and SMAS are shallow, we switch mainly to Coolsonic's 3 mm tip. Fat thickness is assessed in separate zones—above the nasolabial fold, the deep cheek, the jawline, and beside the cheekbone—and depth and shot count are distributed differently for each zone.
At Serene Clinic, when both are done on the same day, Coolsonic comes first and Xerf follows. When Gouri is included, it is injected last, after both energy-based lifting treatments are finished. There are not yet enough direct comparative studies showing which order gives better results, so this sequence reflects Serene Clinic's own practice. Just as important as the order is deciding in advance which deep layers Coolsonic will cover and which skin layers Xerf will cover.
For faces with left–right differences, we look at the degree of asymmetry before treatment and plan a different shot count for each side. During treatment, we watch the tissue contract in real time and redistribute the remaining shots on the spot.
Which faces suit the combination, and which do not?
On the other hand, people in their 20s with little sagging often do well with a single device. If hollow cheeks or temples are the main concern, volume treatments such as filler or Juvelook Volume come before heat-based lifting. For thick, firm skin with almost no sagging, adding both devices may produce only a small change, so we also consider OPUS, which works on the skin itself.
We postpone treatment during pregnancy or if there is inflammatory acne or a wound in the area. If you have an implanted electronic device such as a pacemaker, you must tell us before any RF treatment. Please also let us know about recent filler or threads in the area so we can adjust depth and range.
- The jawline has blurred and the deep cheek has descended, and texture and fine lines are also a concern
- An asymmetric face where sagging differs between sides, so the deep layer and skin layer need separate adjustment
- A single lifting treatment felt insufficient (we first re-evaluate the cause)
How do pain and recovery compare with getting just one?
Because the two devices are done back to back, treatment takes longer, but recovery does not simply double. Redness and mild swelling usually settle within a day or two, and most people can return to daily life right away. Rarely, bruising, tingling, or soreness when pressed may last a few days, so please contact us if discomfort persists.
The pain you feel with Coolsonic is a brief sensation that starts at the focal point in the deep layer. The cooling structure at the tip of the Coolsonic pen keeps the skin cold so you feel this less. Research shows that when skin temperature drops, nerves conduct signals more slowly and the pain threshold rises[4]. It is the same principle as applying ice before a Botox injection.
With Xerf, you mainly feel warmth throughout, and areas where energy goes deeper, such as the jaw or cheeks, may briefly feel hot. With both devices, we adjust intensity while watching your response. If pain is a concern, we apply numbing cream first, add a nerve block if needed, and choose tips matched to your skin thickness to reduce unnecessary stimulation.
Why is Gouri included in the asymmetry correction lifting package?
Gouri is added to supplement elasticity and direction that energy-based lifting alone has difficulty providing. Serene Clinic's Facial Asymmetry Correction Lifting combines Xerf 600 shots and Coolsonic 3,000 shots with GOURI 1 syringe, Juvelook Volume 8cc, LDM, and LED.
Gouri is liquid PCL and is used as Gouri liquid lifting (contour lifting), injected widely across the face with a cannula. It is injected along a lifting direction, similar to thread lifting, and for faces with significant sagging it is done on the same day as energy-based lifting such as Xerf and Coolsonic. Juvelook Volume supports hollow areas.
Not everyone needs this full set. Depending on the balance of sagging and volume loss seen at consultation, some people get only Coolsonic and Xerf, or choose just part of it. Added injections can cause swelling or bruising, so we also discuss scheduling.
When do changes appear, and when is the next session?
Changes appear gradually over 2–4 weeks rather than right after treatment, and often settle around 3 months. Some of the tightness or smoothness felt right afterward may be temporary swelling, so results are judged a few weeks later.
There is no direct comparative study showing that getting Coolsonic and Xerf together makes results last longer. The next session is usually decided between 6 months and 1 year based on how your face responds, and it varies with skin condition and lifestyle.
Prices (as of the November 2026 menu)
| Coolsonic 1,000 shots | 290,000 KRW |
|---|---|
| Coolsonic 2,000 shots (first-visit offer) | 399,000 KRW |
| Coolsonic 3,000 shots | 690,000 KRW |
| Xerf 300 shots (first-visit offer) | 849,000 KRW |
| Xerf 300 shots | 1,159,000 KRW |
| Xerf 600 shots | 1,775,000 KRW |
| Facial Asymmetry Correction Lifting (Xerf 600 shots + Coolsonic 3,000 shots + GOURI 1 syringe + Juvelook Volume 8cc + LDM + LED) | 2,999,000 KRW |
If you choose Coolsonic and Xerf separately, we quote the sum of each item. The number of shots and the combination are decided after consultation.
Frequently asked questions
Can I get Ulthera with Xerf instead of Coolsonic?
Yes. Ulthera is the same kind of ultrasound lifting as Coolsonic, so the principle of dividing layers with Xerf is the same. Ulthera differs in that it is performed while viewing the SMAS on a real-time ultrasound screen, and we choose based on the degree of sagging and pain sensitivity.
If one day feels like too much, can I split them?
Yes. If scheduling or pain is a concern, the two devices can be done on different days, and the interval is set at consultation based on your skin's response. There is no comparative study showing that same-day treatment is better than splitting.
Will results last longer if I get both?
There is no evidence yet to say so. The combination study only looked at results up to 3 months, and how long results last varies widely with skin condition and lifestyle.
Can I go to work the next day?
In most cases, yes. Redness usually settles within a day or two. On the day of treatment, please avoid saunas, alcohol, and rubbing your face hard when washing.
References
- Laubach HJ, Makin IR, Barthe PG, Slayton MH, Manstein D. Intense focused ultrasound: evaluation of a new treatment modality for precise microcoagulation within the skin. Dermatol Surg. 2008;34(5):727-734.
- Haykal D, Sattler S, Verner I, Madhumita M, Cartier H. A systematic review of high-intensity focused ultrasound in skin tightening and body contouring. Aesthet Surg J. 2025;45(7):690-698.
- Wang R, Peng G, Chen Y, et al. Combined novel microfocused ultrasound and microneedle fractional radiofrequency system for multilayered facial rejuvenation: a prospective, randomized, and split-face study. J Cosmet Dermatol. 2025;24(10):e70455.
- Algafly AA, George KP. The effect of cryotherapy on nerve conduction velocity, pain threshold and pain tolerance. Br J Sports Med. 2007;41(6):365-369.
This article is general medical information. Results and how long they last vary from person to person. Any treatment can cause side effects such as redness, swelling or pain, so please decide after a consultation.

